DK , Double column crossrail movable type machine center

Double column crossrail movable type machine center

Characteristic of Cross-rail upon-down The cross rail (W axis) could move upon the height of working piece, to increase the efficiency of machining and save the production cost and enlarge the production range. Super machining ability The cross rail could be close to working piece, make sure the shortest extending length of spindle, increasing the performance of machining, and extend the lifetime of tooling. High Flexibility features When ATC equipped, the command of tool change could be executed at any position, and the user have several different choices of ATC numbers. Strong structure Both cross rail and column were equipped with hydraulic locking system ensure the cross rail and column matched closest, high rigidity and high accuracy 　 　 　 Cross rail One-piece iron-casting cross rail, high rigidity structure of - Crossing Rib designed of front part and Box type designed forrearpart.Accompanying bridge type outline, it could support the vertical force of gravity and horizontal resistance, to make sure the best rigidity in machining process. 　 Y axis Parallel slide ways designed Y axis,accompanying with both roller and flat type tracker. The linear guide ways keep the sensibility of high-speed moving, and flat type tracker offers higher loading capacity. 　 Gear box of spindle 1. Square type design, 440 * 440 mm dimension, high rigid structure, minimized the possibility of interference with working piece. Ladder type slide-way make the spindle center most close to the cross rail, increasing the stabilization of machining. 2. Gear box and spindle housing is one-piece iron casting, the short transmission of cutting twist, large output power stable resistance in large cutting offer the best machining performance and lowest noise. 　 　 　 Characteristic of mold machining Rough molding machining : Large cutting capacity, high speed, stabilized and lower vibration Finished molding machining : Excellent surface, minimized error of curve / roundness, without segment mark. 　 Controller cabinet No-shape design cabinet of controller to avoid any accident during operation.Single-unit controlling button could be replaced separately when it was damaged. Background light makes sure the correct operation under the dark operation environment. 　 Pendant arm of controller cabinet Friendly design of pendant arm. The cabinet of controller could be moved forward-backward, upon-down, right-left, to make sure the operator could operate the machine in the best position. 　 　 Spanner Code A B C D E.M.(mm) 134.6 126 145.75 145.75 Ejection Path(mm) 1 1 1 1 Max pull force(N) 25,000 25,000 25,000 25,000 Max Stroke(mm) 6 6 6 6 medium transfer axial transfer 　 Tool Standard Code DIN 69871/69872 iso7388/1/1 Type A A ANSI B 5.50-78 ISO 7388/1/2 Type B B MAS 403-1982 BT/PT 2 (30°) C MAS 403-1982 BT/PT 1 (45°) D