| Description/Model | UNIT | DL-3006 |
| X-axis travel |
mm |
6150 |
| Y-axis travel |
mm |
3100 |
| Z-axis travel |
mm |
Optional Accessories |
| istance from spinklenose and to table |
mm |
100-1800 |
| Distance between columns |
mm |
3100 |
| Work table size(Lx W) |
mm |
6000-2500 |
| T slot size of worktable |
mm |
Wide 22 * 11 * 220 Pitch |
| Max. worktable load |
kg |
22000 |
| Spindle motor(Cont./30min) |
HP |
15/4P |
| Spindle speed |
rpm |
Optional Accessories |
| Spindle speed variation |
|
Manual gear shitting |
| Spindle taper |
|
NT.50 or BT.50 |
| Rapid feed rate(X/Y axis) |
mm/min |
NC-serco motor 5000/3000 |
| Rapid feed rate(X/Y axis) |
mm/min |
AC-inverters motor 4000/1500 |
| Rapid feed rzte Z axis |
mm/min |
NC-servo motor 800 |
| Rapid feed rzte Z axis |
mm/min |
AC-inverters motor 480 |
| Cutting feed speed |
mm/min |
200-2200 |
| X.Y.Z. AC inverters motor |
HP |
20 , 2 , 1 |
| X.Y.Z. servo motor-FANUC |
|
α50,α30,α22 |
| X.Y.Z. servo motor-MITSUBISHI |
|
HA900,300,200 |
| Cross rail up-down |
HP |
AC3/4P |
| Side milling head up-down |
HP |
AC2/6P |
| Cross rail hydraulic system |
HP |
AC3/4P |
| X-axis lubricator |
HP |
AC1/4 |
| Y.Z-axis lubricator |
HP |
AC/25W |
| X axis ball screw |
mm |
Ø100P20 |
| Y axis ball screw |
mm |
Ø50P10 |
| Z axis screw |
mm |
NC-ball screw Ø40P5 |
| Cross rail up-down screw |
mm |
Ø70P8 |
| Side head up-down screw |
mm |
Ø70P6 |
| Required air pressure |
kg/cm2 |
5 above |
| Hydraulic oil capability |
Liter |
80 |
| Lubricator oil capability |
Liter |
8 |
| Floor spaace |
Long/mm |
15000 |
| Machine W*H(max-Mine) |
mm |
6706X5640 , 6140(height/low) |
| Machine net weight |
kg |
69500 |
|
The information above is for your reference only. Acual specificaions are based on the contract.
|
Standard Accessories
- Y axis left/right side milling, up/down central automatic lubricating system.
- Y axis left/right wire guiding chain.
- Side milling up/down wire guiding chain.
|
Optional Accessories
- Multiangular milling Head.
- Angular head.
- Long Angular head.
- Digital readout.
- Cooling air blast.
- Air drawbar.
- Horizontal supporter.
- NC control system.
|
The spec is for reference only, please do in accordance with the draft design and the agreement if the customers need the optional accessories.
DL-3006 
